Elektronisch prijskaartlasser

Model: DZ-2018TA Ultrasonic welding machine / Ultrasonic Plastic Welder

Application: Electrpnic Price Tag Welder

Delay Time/Weld time/Hold Time : 0.01-9.99s

Voltage: 110V/220V

There are requirements for Plastic Ultrasonic Welding Machine, which need to be thermoplastic materials. After molding, the material is softened by heating up and can be reprocessed, and its chemical structure remains unchanged. The resin structure of thermoplastics is linear before and after secondary processing, and the chemical structure does not change during the welding process, and it has both fusible and soluble properties.

Ultrasonic welding will produce a certain temperature .If using the machine when without well debugg ing,it may deform or break de plastic, or it may lead to direct damage to ultrasonic welding machine . S o it is necessary to understand whether the material is suitable for welding in advance .

In general, it is possible to use ultrasonic welding machine to weld plastic materials such as PVC, Acetal, PPO, PSF, PPS, PS, PE, PC, PA, etc. Welding effects such as ABS and PS are always goed. If c hoosing this soort van material , you zal krijgen not only beautiful products , but also may eliminate lots of trouble.

1. Some ester acid weaving materia l is more difficult to be welded. B ecause its contact surface is not easy to absorb ultrasonic energy, the vibration overheating eas ily lead to local discoloration in ultrasonic welding process .

2. ABS material and benzene -copo lymer which is light and easy to form clumps, and with rigidity, impact resistance and chemical resistance, which has a wide range of uses . This kind of material has good thermal conductivity . ABS material is suitable for ultrasonic welding machine .

3. Acetal material not only has strong tensile strength, but also high compressive strength, en zijn abrasion resistance is especially strong. When acetal workpiece has been welded by ultrasonic, het needs to increase the vibration amplitude and lengthen the welding time. These materials are mostly used for supporting parts such as bearings, kitchen utensils, screws and rollers because of their relatively low wear resistance coefficient.

4. PMMA (acrylic acid) is not only hard, but also not affected by acid. It has high optical permeability and good color. When it is used in ultrasonic welding machine, the first thing to pay attention to is the brightness problem. I t is c ommonly used in automobile taillights, instrument panels, medals, faucet rubber handles, etc.

5. Materials such as PS , polystyrene series plastics, thermoplastic resins, shiny and transparent beads or granular solids, they have strong corrosion resistance to water and chemical substances, also with good insulation . This kind materials is suitable for extrusion or extrusion molding, it is mostly used for v arious toys, decorations, washing equipment, lenses and other products. The material has a high elastic coefficient and is suitable for ultrasonic welding.